Through Via Mounting: This mounting technique involves different components which have lead wires that are led to the board through holes, hence the name. In this method, leads rely on holes in a multilayer Aluminum pcb. The leads are then finally soldered to offer permanent mounting. The technology finds usage in DIP aka Dual Inline Packaging and Pin Grid Array Package.
Surface Mounting: This is a relatively new mounting method worked out seeing a tremendous increase in the number of pins in Integrated Circuits. As demand for smaller weight and size of packaged weight increased, there was felt a need for a new, improved technology that came to be known as surface mount technology (SMT). In this leads are soldered on PCB surface directly rather than using hole mounting. The technology is used in Flatpack Packages and Chip Carrier Packages.
There are some points that make SMT different from Through Hole, which have been briefly summarized below:
1. SMT has helped significantly in solving the space problems that were commonly noticed with the Through Hole mounting.
2. The pin count has increased greatly in SMT when compared to its older counterparts.
3. In SMT, the components are leadless and are directly mounted to the board surface. In Through Hole the components have lead wires that are taken to the wiring boards via
holes.
4. The Pads on the surface in SMT are not used for connection of layers on the printed wiring boards.
5. The components in the Though Hole Technology are larger which leads to lower component density per unit area. The packing density that can be achieved with SMT is very high as this allows mounting component on both sides, when needed.
6. SMT has made possible applications that seemed impossible with through hole.
7. SMT is suitable for high volume production that gives access to lowered cost of unit assemblies which is not possible with through hole technology.
8. With SMT acquiring higher circuit speed is easier due to the reduced size. SMT fulfils one of the prime marketing requirements while assisting in making high performance circuits in a very small size.
9. SMT has a disadvantage as the capital investment involved in its machinery and production is higher.
10. Designing, production, skill and technology required in implementing SMT is very advanced when compared to through hole technology.
When comparing both, SMT surpasses Through Hole in advantages, which clearly define and justify the majority (90%) use of this technology in board assemblies. Through Hole however is anticipated to remain in use in testing and prototype applications that may need manual adjustments and replacements. Its complete disappearance from the scene seems to be ruled out. Contact wonderful02@wonderfulpcb.com if you have any inquiry about PCB.
2015年3月16日星期一
2015年3月13日星期五
Designing Your Circuit
Before you can consider any physical designs or schematic connections you must have a clear idea of what you want your design to do. This means taking some time to sit down and define what you want to accomplish, consider the challenges, and pick the right components for the job.
Determining Your Goals
The first step in designing the perfect Multilayer pcb is to have a well-defined set of goals that you would like your design to accomplish. To steal a little bit from the business world, you should always set SMART goals for your project, this means:
Specific
Measurable
Attainable
Realistic
Time Bound
As a personal example, I have started working on another side project for my own use. The bathroom in my apartment is too dark in the evening for me to get around in, but when I turn the light on it is way too bright and wakes me up.
To fix this little issue I thought I would just go buy a small lamp. Unfortunately, I am a little bit too picky and couldn’t find a lamp that I liked. That is when I had the idea to design one of my own. Of course, I’m not talking about just any lamp. I wanted a multi-color, adjustable brightness, wirelessly controlled lamp.
Sounds cool right? Of course it does! So before the idea was able to leave my head I jotted it down in my notebook and began planning.
At this point, my goals were pretty broad, let’s take a look at what I had:
Multi-color lamp
Adjustable brightness
Wireless control
Unfortunately none of these goals are very specific at all. What do I mean by multi-color? Is that two colors, three, or any variable color? What is adjustable brightness? I mean technically on and off would be two different brightness settings right? Wireless control? What, do I want to use Wi-Fi, Bluetooth, infrared, RF, Zigbee, sound? Any of these options would be possible.
Following will be continued in next chapter.
Shirley Xia
Oversea sales
Wonderful PCB
A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China.
T +86-755-86229518-821 / Cell phone and whatsApp:008613480796172
F +86 755 2607 3529|
e wonderful25@wonderfulpcb.com |
w www.wonderfulpcb.com | Skype:wonderful-pcb02
Welcome to our trading shows:
Booth: 9G27, HK Globalsources Oct.11-14th,2014 AsiaWorld-Expo, Hongkong
Booth:A3.274-1,2014.11.11-2014.11.14,the Electronica in Munich, Germany
Determining Your Goals
The first step in designing the perfect Multilayer pcb is to have a well-defined set of goals that you would like your design to accomplish. To steal a little bit from the business world, you should always set SMART goals for your project, this means:
Specific
Measurable
Attainable
Realistic
Time Bound
As a personal example, I have started working on another side project for my own use. The bathroom in my apartment is too dark in the evening for me to get around in, but when I turn the light on it is way too bright and wakes me up.
To fix this little issue I thought I would just go buy a small lamp. Unfortunately, I am a little bit too picky and couldn’t find a lamp that I liked. That is when I had the idea to design one of my own. Of course, I’m not talking about just any lamp. I wanted a multi-color, adjustable brightness, wirelessly controlled lamp.
Sounds cool right? Of course it does! So before the idea was able to leave my head I jotted it down in my notebook and began planning.
At this point, my goals were pretty broad, let’s take a look at what I had:
Multi-color lamp
Adjustable brightness
Wireless control
Unfortunately none of these goals are very specific at all. What do I mean by multi-color? Is that two colors, three, or any variable color? What is adjustable brightness? I mean technically on and off would be two different brightness settings right? Wireless control? What, do I want to use Wi-Fi, Bluetooth, infrared, RF, Zigbee, sound? Any of these options would be possible.
Following will be continued in next chapter.
Shirley Xia
Oversea sales
Wonderful PCB
A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China.
T +86-755-86229518-821 / Cell phone and whatsApp:008613480796172
F +86 755 2607 3529|
e wonderful25@wonderfulpcb.com |
w www.wonderfulpcb.com | Skype:wonderful-pcb02
Welcome to our trading shows:
Booth: 9G27, HK Globalsources Oct.11-14th,2014 AsiaWorld-Expo, Hongkong
Booth:A3.274-1,2014.11.11-2014.11.14,the Electronica in Munich, Germany
订阅:
博文 (Atom)

