显示标签为“China Rigid-flex pcb”的博文。显示所有博文
显示标签为“China Rigid-flex pcb”的博文。显示所有博文

2015年3月4日星期三

WonderfuI Printed Circuit Board

From the number of layers and the development direction of PCB board to points, the PCB industry into a single panel, double panel, conventional multilayer flexible board, HDI (high density interconnect) board, package substrate and other six major product segments . From the product life cycle "lead-in period - growing - maturity - a recession" and four-cycle dimension view, where a single panel, double panel electronics products because they do not fit the current trends in the application of thin short, is in recession, its value gradually reduce the proportion of developed countries and regions such as Japan, Korea and Taiwan has been very little in the local production of such products, many manufacturers have made it clear that no longer meet single and double panel. Conventional multilayer and HDI products, process capability maturity are more sophisticated, higher value-added products, is currently the most major PCB factory full Zhugong direction, Chinese manufacturers are only a handful of ultrasound and electronic production techniques; scratch plates, especially high-density flexible and rigid PCB board, due to the current technology is not yet mature, a lot of manufacturers failed to achieve mass production of products are growing, but because it has more than a rigid plate adapted to digital products features flexible plate growth is high, is the future direction of the various manufacturers.
     
IC package substrate used, whether it is R & D or manufacturing in the electronics industry in developed countries such as Japan, South Korea, more mature, but in the country is still in the exploratory stage technology, only Ibiden (Beijing) Co., Ltd., Advanced Semiconductor (Shanghai) Co., Ltd., Zhuhai Doumen Chao Yi Electronics Co., Ltd., one of the few manufacturers in small batches. This is because of China's IC industry is still underdeveloped, but with the multinational electronics giant will continue to move to China IC R & D institutions, and improve China's own R & D and production levels of IC package substrate will have a huge market, is a big vision plant development. China's hard board (single-sided, double-sided, multilayer, HDI board) share reached 70%, of which 5 percent share of the plywood accounted for the largest proportion, followed by soft board with 15.6% of the proportion of second place. Due to the pressure of oversupply, most manufacturers to enter the price war, output growth is lower than expected.      
        
PCB domestic product from the future development trend, output growth is slightly lower than the sales growth was mainly the product gradually to the multilayer structure, the development of high precision. Our multilayer and HDI board is in the business of growing, expanding, increasingly mature technology. MLB is still the mainstream market development; and HDI board by the downstream electronic information products upgrading demand-pull, is in a period of rapid development.

Sophie Deng
_______________________________________
Wonderful PCB Limited
NO.32A,Building NO.1, XianDaiC hengHuaTing,ChuangYeRoad|NanShan District,ShenZhen City 518054|  China  T +86-755-86229518-806 | F  +86 755 2607 3529|  e  wonderful08@wonderfulpcb.com |
w  www.wonderfulpcb.com  | Skype:wonderful-07   |                                                   
Welcome to our trading shows:
1.Booth: L32,Expo Electronic 2013,Apr.10-12th in CROCUS EXPO,Moscow,Russia
2.Booth: 11J36, HK Global sources  Apr.12-15th, 2013 Asia World-Expo, Hong Kong
3.Booth: 9J35, HK Global sources Oct.12-15th,2013 Asia World-Expo, Hong Kong
4.Booth: 70206, CES  2014  Jan,8th-11th in Las Vegas, USA

2015年1月5日星期一

FPC Assembly


Nowadays, technology is already very mature to rigid Printed circuit board, however, many problem may be faced by operator during SMT to FPC.
1 False soldering, short soldering,Tin beads.
2.The Reason is due to the hardness of  raw material of FPC(Flexible printed circuit) caused, FPC is out of shape when meet the hot air and high temperature in reflew machine. Lead the wave shape to FPC, and the slop to FPC pads, then cause the flow of molten tin (liquid tin under high temperature), which cause False soldering, short soldering,Tin beads.(The main reason is the hardness of FPC). So if make the hardness of FPC into the same situation as rigid printed circuit board, and all soldering problem to FPC can be solved. The condition is you should know the SMT process to PCB. And then improve the hardness of Flexible Printed circuit into with the same hardness as rigid PCB, and then FPC SMT can be realized. And some problem, like no fix hole, no mark point, or the FPC is over long, which are the fault of designer, and it is also hard to be solved even to rigid PCB SMT. And NG rate can be only reduced based on personal experience or device independence.

According to above comment, the main solution is to improve the hardness of FPC the same as hardness of Rigid-flex pcb.

B. How to realize stable soldering to FPC
How to get the stable FPC (flexible circuit board) to the rigid PCB welding effects depends on the degree of hardness.
Methods: using jigs(carrier, handling plate) to make FPC perform as rigid board during SMT.

Below is the instruction of Magnetic reflow soldering tray
The material
1. Choose imported alloy material: good flatness, stable performance under high temperature
2. High temperature resistant magnet (300 degrees) to ensure permanent magnet during reflow soldering process.
3.The special steel, with magnetic treatment and good elasticity, and no deformation under high temperature.
4.Performance
(1) Because the flatness to FPC surface cause from the steel pressure l, it can reduce the flow of solder tin during reflow, which can ensure the good quality of soldering and reduce the NG soldering at meanwhile.
(2) Ensure the life of tray when choosing tray material.
(3) Easy and convenient operation with high stability.
(4) Heat insulation, prevent the FPC from deformation
There’s no special requirement to the composition of solder paste of FPC, the size of the tin ball particles and the amount of metal content, etc will be subject to if there is narrow space of IC pins on FPC, BUT FPC has high performance requirements to the solder paste printing, solder paste should has good thixotropy, solder paste should be able to easily be printed , demoulding and can be firmly adhere to the surface of FPC, there will be no mold release lead the hole in stencil filled with tin or such as collapse after printing.

Because FPC fixed on the pallet before SMT,  and the FPC with high temperature heat-resistant pressure-sensitive adhesive tapes for purpose of location, which make its planar inconsistencies, thus FPC printing surface is unlikely to be as smooth as rigid PCB and the same consistent on thickness and hardness, so operator should not use a metal scraper, and should use the polyurethane scraper which with hardness of 80-90 degree.

Solder paste printing machine is best to be with the best optical positioning system, otherwise will have great influence to printing quality, FPC although fixed on the load board, however, there always be small space between FPC and the load board, this is the biggest difference as rigid PCB board, thus the equipment parameters’s setting will also has great influence to the printing effect.

Printing stations is also the key location to prevent FPC from being smudgy, need to wear glove then can go ahead for operation, at meanwhile,  workstation should be kept clean, stencil should be frequently wiped to be clean, to prevent the solder paste to pollute the gold fingers and gold plated key button.

Control of FPC SMT

According to the properties of the products, components quantity and efficiency of mounting, it is OK to adopt high-speed placement machine for SMT. Because every piece of FPC has positioning with fiducial MARK, therefore, there’s no big difference on surface mounting technology between FPC SMD mounting and rigid PCB SMD mounting. It is important to note that although the FPC are fixed on the load board, but its surface can’t be the same flatness like rigid PCB board surface, local space must  exist between FPC and load board, so, the height of suction nozzle’s dropping, compression of blowing should be exactly setted.  On other side, most bare FPC performance as panel; format, and the rate of good finished product relatively low, so it if normal that there’re part of pieces with not good quality, which request recognition function on BAD MARK to SMT machine, otherwise, when mounting FPC panel with the status of not all pieces are good, will show low efficiency.

2014年12月29日星期一

PCB Board and Its Advantages to the Industrial Setups 1----Wonderful PCB(hk)Limited



In a very shortest time frame, PCBs or printed circuit boards have turned as the most sophisticated tools used in the electrical equipment domain. In such the competitive market place, importance and gravity of the printed circuit boards can’t be ignored. A PCB or printed circuit board contains highly advanced chips. These applications are placed a very slim plate for some of the components. Manufacturer and developing PCB boards is certainly a tough job that requires massive presence of mind, highly skilled knowledge base and awareness of latest technologies as well.

If experts are to be believed, PCB is an essential device used in almost every industry irrespective of capital, size or strength. A single fault in PCB boards may lead to the big damage and major loss the industry. You may get a number of instances of the PCBs across you. The perfect instance of PCB is motherboard, controller board and different kind of interface cards.

These PCBs have crafted a very special market place in the market and its growing demands are now being fulfilled by numerous manufacturers in the industry.

There are three primary elements of a Printed circuit board namely a laminate board, components mounted on the board and the traces that serve as the wires. The use of actual components in the circuit board is entirely depends upon the purpose and intention of the circuit. Elements used in the PCBs play significant role in finding the Production costs, working efficiency and operating cost of the PCB circuit.lectric layer, a layer of silk screen will be printed. Some words will be printed to show the position of those components. It is also called legend.
PCB finishing
PCB Surface Finishes vary in price, availability, shelf life, reliability and assembly processing. While each finish has its own benefits, in most cases, the process, product or environment will dictate the surface finish that is best suited for the application. It is recommended that the end-user, designer or assembler work closely with their PCB supplier to select the best finish for the specific product design.
If need any more information on PCB, you could check and source from this website: http://www.wonderfulpcb.com Wonderful PCB Technology Co., Ltd is a professional PCB manufacturer for many years and could try best to help!
.
Ms. Jodie Zhou
Wonderful PCB
T +86-755-86229518-807 | F  +86 755 2607 3529|  e  wonderful09@wonderfulpcb.com |
www.wonderfulpcb.com | Skype: wonderful-02   | MSN: wonderfulpcb06@hotmail.com
Welcome to our trading shows:
1. Booth:  L32, Expo Electronics 2013, Apr.10-12th in CROCUS EXPO, Moscow, Russia
2. Booth: 11J36, HK Global sources Apr.12-15th, 2013 Asia World-Expo, and Hong Kong
3. Booth: 9J35, HK Global sources Oct.12-15th, 2013 Asia World-Expo, Hong Kong

2014年12月28日星期日

Flying Probe test



Flying Probe test is to test some of the major problems of electrical latest solutions. To replace it with a probe needle bed, a plurality of motor-driven can quickly move the probe with the electrical devices of the pin contact and electrical measurements. This instrument was originally designed as a bare board, also requires sophisticated software and program support; has now been able to effectively simulate the online Aluminum pcb test. Flying Probe Test appearance has changed the test method and the low yield rapid conversion (quick-turn) assembled products. Used to take weeks to develop a test a few hours now, and greatly shorten product design cycles and time to market.

Rapid test development; low cost test methods; flexibility fast conversion; well as in the prototype stage to provide rapid feedback to the designer. Therefore, comparing the traditional ICT, Flying Probe test by reducing the time required to make up for the total test time. Flying Probe test system using the benefits outweigh the disadvantages. For example, during assembly, such a CAD system file received after the start of production hours. Therefore, to test the prototype circuit boards for several hours after assembly, not like ICT, high-cost test development process and fixture may be delayed a few days or even a few months. In addition, due to the simple and quick setup, programming and testing, in fact, the general assembly of technical personnel, and not an engineer, you can operate the test. Flying Probe test also exist the flexibility to do a quick test errors quickly convert and process feedback. Also, because the test does not require flying fixture development costs, so it is a typical testing process can be placed in front of the low-cost systems. And because Flying Probe Tester change and rapid test method to convert low-yield assembly, testing usually takes a few weeks to develop a few hours you can get now.

Automatic optical alignment system and the traditional combination of flying machines, the entire automatic optical alignment can make flying more convenient testing and flying in the image processing software dedicated to digital cameras with the help of more accurate. In the traditional Flying Probe test machine, the installation of Flying dedicated to digital cameras and the corresponding image processing software; flying probe testing throughout the automatic identification and detection of the corresponding position to make flying safe and fast test. Having regard to the requirements for fast and precise flying machine, solid industrial hardware and graphics hardware choice, you should first take into account the lightweight, industrial, optical distortion-free, high-speed image processing algorithms; such testing in the actual process of flying because the industry does not appear to affect the hardware itself, the weight of the test accurate, does not appear lost step, and does not affect the image processing algorithm speed flying probe test.

2014年12月25日星期四

Knowlage Of Printed Circuit Board


Author:Sophie
     Electronic products function depends on the correct interconnected electronic components, most of these components are interconnected based on the circuit board welding. Circuit board welding in the assembly of electronic products, has been playing an important role. There are many connections even if the current technology, but the circuit board welding remained dominant.
     Circuit board welding is an important part of electronic technology. Proper design and good solder process (ie, circuit board soldering process), is the key factor for reliable soldering. The so-called "reliable" refers to all the properties of the solder joints only when the product has just produced as required, but also throughout the life of electronic products, and should be guaranteed to work correctly.
     Although all of the physical-chemical principles of welding process is the same, but for soldering electronic circuits and has its own characteristics, i.e., miniaturization and high reliability, which is consistent with the characteristics of electronic products. Circuit board welding quality will be affected by many factors. Funds such as the type of material and its surface is, the type and thickness of the coating, processing technology and methods, surface condition before welding, soldering components, welding, soldering temperature and time are base metal welding gap size, flux type and performance, welding tools. Important reason for not being among the internal structure of the metal oxides and lead solder components lead compounds the situation is affecting the surface leads solderable, but also affect the surface of the oxide Flexible pcb pad solderability main reason.
     Using tin-lead soldering tin-lead solder is called, referred to soldering, the mechanism is: will solder in the solder process, weldment and copper under the action of heat welding, weldments and copper does not melt, the solder is melted and welded surface wetting rely weldments asked two copper atoms and molecules to move, thereby causing diffusion between the metal and the weld is formed between the copper alloy layer of a metal member, and to connect the copper foil and the weldment together, they get solid and reliable solder joints, the above process is the role of the physical-chemical processes each other.
    When the solder and welding weldment joint is heated to welding temperature, melting the solder does not melt weldment. Forming welding solder wetting rely molten state welding surface, resulting in the metallurgical, chemical reaction to form a bonding layer, to achieve a combination of the weldment. Lead-tin solder melting point below 200 ℃, suitable for connecting semiconductors and other electronic materials. Simply heating tools and materials can be processed, less investment. Joints have sufficient strength and electrical properties. Soldering process reversible, easy desoldering
Sophie Deng
_______________________________________
Wonderful PCB Limited
NO.32A,Building NO.1, XianDaiChengHuaTing,ChuangYeRoad|NanShan District,ShenZhen City 518054|  China  T +86-755-86229518-806 | F  +86 755 2607 3529|  e  wonderful08@wonderfulpcb.com |
w  www.wonderfulpcb.com  | Skype:wonderful-07   |                                                  
Welcome to our trading shows:
1.Booth: 9J35, HK Global sources Oct.12-15th,2013 Asia World-Expo, Hong Kong
2.Booth: 70206, CES  2014  Jan,8th-11th in Las Vegas, USA