显示标签为“Multilayer circuit board”的博文。显示所有博文
显示标签为“Multilayer circuit board”的博文。显示所有博文

2015年6月25日星期四

Do you really know Multilayer PCB?

WDF-PCB-M-34,6 layer,wonderfulpcb.com


Most materials systems used in PWBs (aka PCBs) are composites of resins, fabric substrates and metal cladding. Each of these components has its own unique electrical and mechanical properties that contribute to the final characteristics of the finished laminates, prepregs and fabricated multilayer boards (MLBs). In most cases variables such as glass style and resin content have offsetting impacts on physical vs. electrical properties.

Data sheets often provide data in standard IPC formats, which may look at properties in rigid laminates (nominal 0.062” made using heavyweight glass at 32–40% resin content) rather than thin lams and prepregs used for multilayer PWBs (which more typically average 55% resin content or more). To further complicate the situation, some product lines are manufactured with consistent resin content for all product thicknesses, thus maintaining the dielectric properties while letting the mechanical properties be dictated by the constructions and resin content.

An understanding of what such variations in properties mean and how they relate to what the users will actually encounter is essential to design, manufacturability, assembly and end-use viability. In this presentation we will look specifically at the effect of glass style and resin content on dielectric constant and CTE and discuss how even at the product design  level it is important for design engineers to take these into consideration.

Conclusions

In most cases, no single value of dielectric constant or in-plane CTE (representative laminate properties that are impacted by resin content variation—obviously there are others as well, but for purposes of keeping this work manageable, we will focus on these two) will hold for all thicknesses of laminate or build-ups for MLBs. In those cases where either or both are critical, it is necessary to control resin content in both laminate and prepreg to ensure that the finished properties fall within the desired and expected ranges.

In some cases, such as with 85N polyimide and 92ML thermally conductive epoxy products, the specific values of Dk and CTE are less critical than other things such as processibility and design flexibility (as for 85N) or thermal conductivity (for 92ML) and so resin contents are allowed to vary so as to meet these needs.

In other cases either CTE (as in 85NT) or dielectric constant (as for Multiclad HF or 25N/FR) are critical needs, and in those cases the resin contents must be held to controlled limits so that the desired properties are consistently held for most or all of the laminate configurations.

2015年5月12日星期二

Aluminum board process-B

5.4 board inspection
5.4.1 line surface must be in accordance with the requirements of the MI to check all the content.
5.4.2 must check on aluminum surface, aluminum surface dry film cannot have film falls and broken.
5.5 etching
5.5.1 for copper base is commonly 4 oz, will there is a certain difficulty in etching.First plate must be approved by the captain in person to do board, made in the spot check, line width, line spacing should be strengthened once every 10 PNL plate spot check line width, and make records.
5.5.2 recommended parameters: speed: 7 ~ 11 dm/min pressure: 2.5 kg/cm2 proportion: 25 be temperature: 55 ℃ (the above parameters are for reference only, the test plate results shall prevail)
5.5.3 back membrane should be paid attention to the time of the control between 4 ~ 6 min, because aluminium will reaction with NaOH, but also must ensure that the membrane clean, backing down membrane liquid membrane was not allowed to turn up the heat.No protective film of the plate, aluminum, from liquid membrane in the back up after the board will not stay to wash water on a board in time of liquid membrane, prevent the alkali corrosion of aluminum surface.  
5.6 corrosion inspection
5.6.1 normal board.
5.6.2 it is forbidden to use the blade repair line, in order to avoid injury and dielectric layer.
5.7 the solder mask
5.7.1 production process:
Brush copper surface grinding plate (only) to screen printing green oil (the first), and preliminary drying screen printing green oil (second) and the preliminary drying - exposure and development - plate mill, the acid pickling process. Under the soft brush - after curing -
5.7.2 reference parameters:
5.7.2.1 yarn used 36 t + 100 t
First 75 ℃ 5.7.2.2 x 20-30 min;The second 75 ℃ x 20-30 min
5.7.2.3 exposure: 60/65 (single) 9 ~ 11
5.7.2.4 enhancement: speed: 1.6 ~ 1.8 m/min pressure: 3.0 kg/m2 (total pressure)
5.7.2.5 curing: after 90 ℃ * 60 min + 60 min + 110 ℃ 150 ℃ above x 60 min parameters for the use of the DSR - 2200 tl ink, used only for reference.
5.7.3 note printing for control of air bubbles, if need, can add 1-2% of the diluent.
5.7.4 clappers before clappers member should check panel, there is a problem of instruct the captain and then to the clapper.   
5.8 HASL
5.8.1 spray before tin for aluminum plate with protective film tear protective film after spray tin.    
5.8.2 edge with both hands, it is strictly prohibited by hand directly touch the plate (especially aluminum surface).
5.8.3 operation, fight chafed.
5.8.4 tin cookie sheet before 130 ℃, 1 hour, and baking sheet to spray tin interval time less than 10 minutes.In order to avoid temperature difference cause a layered with ink.    
5.8.5 rework plate spray is only allowed to return once, if more than one board, to distinguish for special treatment.    
5.9 aluminum surface passivation treatment
5.9.1 level passivation process: (1) scrubbing brush (500 #) to (2) water - > (3) passivation, (4) washing the x 3-5. Dry - 6 drying
Note: (1) grinding plate: only aluminum surface grinding, FR4 parameter grinding plate.First board to check line no scratches, as well as the tin cried, uniform grinding crack.
(3)passivation: potion ingredients open cylinder quantity cylinder volume liquid temperature control concentration spraying in tank pressurization rate
Na2CO3 (CP) 50 g / 6500 g l, 130 l, 40 ~ 50 ℃ 2.0 ~ 3.0 1.0 ~ 1.5 m/min effective soaking time 10 ~ 15 s 100 m2 CP (K2CrO4) 15 g/l,  1950 g NaOH (CP) 390 g, 3 g/l
6 drying: 80 ~ 90 ℃.
Tyle = "the oledata.mso - spacerun: 'yes', the font size: 10.5000 pt; the font-family:" tahoma "; "> 5.7.2.5 curing: after 90 ℃ * 60 min + 60 min + 110 ℃ 150 ℃ above x 60 min parameters for the use of the DSR - 2200 tl ink, used only for reference.
5.7.3 note printing for control of air bubbles, if need, can add 1-2% of the diluent.   
5.7.4 clappers before clappers member should check panel, there is a problem of instruct the captain and then to the clapper.  

2015年3月16日星期一

How to chat with customers When they visit our factory

Dialogue 1

A: If you are staying here for a few days, we’d be delighted to see you at our factory.
B: It’s very kind of you to say so. My associate and I will be interested in visiting your factory.
A: Let us know when you are free. We’ll arrange the tour for you.
B: Thank you. I’ll give you a call this afternoon to set the time. There’s nothing like seeing things with one’s own eyes.
A: That’s for sure. You’ll know our products better after the visit.

Dialogue 2

A: I’ll show you around and explain the operation as we go along.
B: That’ll be most helpful.
A: That is our office block. We have all the administrative departments there. Down there is the research and development section.
B: How much do you spend on development every year?
A: About 3-4% of the gross sales.
B: What’s that building opposite us?
A: That’s the warehouse. We keep a stock of the faster moving items so that urgent orders can be met quickly from stock.
B: If I placed an order now, how long would it be before I got delivery?
A: It would largely depend on the size of the order and the items you want.

Dialogue 3

A: Put on the helmet, please.
B: Do we need to put on the jackets too?
A: You’d better, to protect your clothes. Now please watch your step.
B: Thank you. Is the production line fully automated?
A: Well, not fully automated.
B: I see. How do you control the quality?
A: All products have to go through five checks in the whole manufacturing process.
B: What’s the monthly output?
A: One thousand units per month now. But we’ll be making 1,200 units beginning with October.
B: What’s your usual percentage of rejects?
A: About 2% in normal operations.
B: That’s wonderful. Is that where the finished products come off?
A: Yes. Shall we take a break now?

Dialogue 4

A: It was very kind of you to give me a tour of the place. It gave me a good idea of your product PCB Application.
B: It’s a pleasure to show our factory to our customers. What’s your general impression, may I ask?
A: Very impressive, indeed, especially the speed of your NW Model.
B: That’s our latest development. A product with high performance. We put it on the market just two months ago.
A: The machine gives you an edge over your competitors, I guess.
B: Certainly. No one can match us as far as speed is concerned.
A: Could you give me some brochures for that machine? And the price if possible.
B: Right. Here is our sales catalog and literature.
A: Thank you. I think we may be able to work together in the future.

Shirley Xia
Oversea sales
Wonderful PCB

 A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China.
T +86-755-86229518-821 / Cell phone and whatsApp:008613480796172
F  +86 755 2607 3529|
e  wonderful25@wonderfulpcb.com |
w  www.wonderfulpcb.com  | Skype:wonderful-pcb02
Welcome to our trading shows:
Booth: 9G27, HK Globalsources Oct.11-14th,2014 AsiaWorld-Expo, Hongkong
Booth:A3.274-1,2014.11.11-2014.11.14,the Electronica in Munich, Germany

2015年3月11日星期三

PCB Classification

According to the circuit layer classification: divided into single panel, double panel and laminated. Common sandwich plate is commonly 4 layer board or 6 layer boards; complex sandwich plate can reach dozens of layers.

1. Single – Sided PCB
http://www.wonderfulpcb.com/Single-Sided-PCB.html

Single panel (Single - Sided Boards) in the most basic on the PCB of parts on one side, the conductor is focused on the other side (have SMT components with lead to one side, the plug-in device to the other side).Because the wires in only one side, so this kind of PCB is called Single panel (Single sided).Because single panel in the design of lines, there are many restrictions (because only one side, wiring must around the path alone cannot cross between), so only use this kind of early circuit board.


2. Double - Sided PCB
http://www.wonderfulpcb.com/Double-Sided-PCB.html
Double panel (Double - Sided Boards) to both sides of the circuit board wiring, but it took two wires, must have the appropriate circuit connection between two sides. This circuit is called the "bridge" between the guide hole (via).Guide hole is on the PCB, or coated with metal small hole, it can be connected to both sides of the wire. Because the area of the double panel a times larger than a single panel, double panel solved because wiring of the difficulty in the single panel (can be conduction through the hole to the other side), it is more suitable for use in more complex than a single panel circuit.

3. Multi - Layer PCB
http://www.wonderfulpcb.com/Multilayer-PCB.html
Sandwich plate (Multi - Layer Boards) in order to increase the area of the wiring, a multilayer wiring board using the more single or double. With a double lining, two one-way for outer layer or two double lining, two blocks of single outer layer of the printed circuit board, through the positioning system and alternate insulation adhesive materials and conductive graphics interconnection according to design requirement of printed circuit board becomes four, six layer printed circuit board, also known as multilayer printed circuit board. Layer number of the board does not mean that there are several independent wiring layer, under special circumstances will join empty layer to control board thickness, layer number usually is even, and contains the outer two layers. Most of the motherboard is 4 to 8 layer structure, but technical theory can be nearly 100 layers of PCB. Large supercomputers are used quite layers of the motherboard, but because this kind of computer can replace with many ordinary computer cluster, super sandwich plate has not been used gradually. Because each layer of PCB are closely combined, the actual number is generally not too easy to see, but if you look closely at the motherboard, can still see it.