显示标签为“printed circuit boards”的博文。显示所有博文
显示标签为“printed circuit boards”的博文。显示所有博文

2015年3月11日星期三

Designing Your Circuit

Before you can consider any physical designs or schematic connections you must have a clear idea of what you want your design to do. This means taking some time to sit down and define what you want to accomplish, consider the challenges, and pick the right components for the job.
Determining Your Goals
The first step in designing the perfect circuit boards is to have a well-defined set of goals that you would like your design to accomplish. To steal a little bit from the business world, you should always set SMART goals for your project, this means:
Specific
Measurable
Attainable
Realistic
Time Bound
As a personal example, I have started working on another side project for my own use. The bathroom in my apartment is too dark in the evening for me to get around in, but when I turn the light on it is way too bright and wakes me up.
To fix this little issue I thought I would just go buy a small lamp. Unfortunately, I am a little bit too picky and couldn’t find a lamp that I liked. That is when I had the idea to design one of my own. Of course, I’m not talking about just any lamp. I wanted a multi-color, adjustable brightness, wirelessly controlled lamp.
Sounds cool right? Of course it does! So before the idea was able to leave my head I jotted it down in my notebook and began planning.
At this point, my goals were pretty broad, let’s take a look at what I had:

Multi-color lamp
Adjustable brightness
Wireless control
Unfortunately none of these goals are very specific at all. What do I mean by multi-color? Is that two colors, three, or any variable color? What is adjustable brightness? I mean technically on and off would be two different brightness settings right? Wireless control? What, do I want to use Wi-Fi, Bluetooth, infrared, RF, Zigbee, sound? Any of these options would be possible.

Following will be continued in next chapter.

Shirley Xia
Oversea sales
Wonderful PCB

 A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China.
T +86-755-86229518-821 / Cell phone and whatsApp:008613480796172
F  +86 755 2607 3529|
e  wonderful25@wonderfulpcb.com |
w  www.wonderfulpcb.com  | Skype:wonderful-pcb02
Welcome to our trading shows:
Booth: 9G27, HK Globalsources Oct.11-14th,2014 AsiaWorld-Expo, Hongkong
Booth:A3.274-1,2014.11.11-2014.11.14,the Electronica in Munich, Germany


2015年3月3日星期二

Drilling in Printed Circuit Board

    A circuit board drilling is just like a common drill, except that it is optimized for drilling holes in the printed circuit board as opposed to drilling holes in other materials such as wood. Holes are normally drilled in circuit boards which made from tungsten because of its mechanical properties. Another difference of circuit board drilling from wood drilling is that, the size of this type of drill can vary greatly because it typically is very small. Sometimes, this drill is made by people, but it more often is combined with a drill press for automated drilling by the machines.

   There are two main drilling holes in the pcb board. One is NPTH hole, another is PTH hole. All the holes in the single sided printed circuit board are NPTH hole. That’s because no need for electronic conduction between layers in single sided PCB. It has just one copper foil layer. PTH hole will appear in double sided or multilayer PCB.
These holes exist for the electronic conduction among layers. So it may have Copper in these holes.
   While as explained, circuit board drilling holes must be very small. We usually use unit mil to indicate it. What’s more tungsten is a very hard metal. So circuit board drilling holes are made by drill bits. The PCB drill bits are made of micro grain carbide. They are used primarily in CNC machines for drilling printed circuit boards for electronics, but their toughness and accuracy lend them to uses in other industries. When a hole has to be drilled through a circuit board, the bit must go through copper traces, which are sturdy and hard. That’s a subtle work. A piece of printed circuit board may have several thousand of drilling holes including NPTH and PTH holes, so many PCB boards are finished drilling by machines!
   One thing we should pay attention to is the smear when drilling holes in a PCB. For multilayer boards, those with three layers or more, drilling typically produces a smear of the high temperature decomposition products of bonding agent in the laminate system. We should remove the smear before plating through these holes. So we need to have a chemical de-smear process, or plasma-etch. The de-smear process remove smear to ensure that a good connection or electronic conduction among layers when the holes are plated through. If smear remains in the PTH holes, it may cause short cut in the printed circuit board. Some bad PCB products are rejected just because the smear of the holes!

2015年3月2日星期一

Worldwide Semiconductor Sales Expected to Reach $358 Billion in 2015

Worldwide semiconductor revenue is forecast to reach $358 billion in 2015, a 5.4 percent increase from 2014, but down from the previous quarter's forecast of 5.8 percent growth, according to Gartner, Inc. The market is being driven by strong growth in application-specific standard products (ASSPs) in smartphones, along with DRAM and NAND flash in ultramobiles and solid-state drives (SSDs).

"Semiconductor revenue growth in 2015 is expected to slow from the 7.9 percent growth experienced in 2014 as DRAM returns to more traditional price reductions and the industry burns off excess holiday inventory," said Jon Erensen, research director of Gartner. "DRAM pricing was unusually firm in 2014 due to short supply, which propelled DRAM to be the fastest-growing device type in 2014 with 31.7 percent revenue growth. DRAM supply and demand will be in line in 2015, driving bit pricing down a more traditional 16.8 percent and reducing annual DRAM revenue growth to 7.7 percent."

From an application point of view, smartphones, SSDs and ultramobiles will see the largest dollar increases. In 2015, compute applications will continue to be the largest market for semiconductors, followed by wireless and consumer applications. Combined, these three device categories represent more than two-thirds of total semiconductor revenue and have the most influence on the overall strength of the semiconductor market.

However, in 2015, the industrial electronics segment is expected to outperform overall semiconductor market growth and other electronic application categories with revenue growth of 9.1 percent. The growth will be driven mainly by LED lighting applications for industrial and residential purposes and smart city projects. In addition, the Internet of Things (IoT) will continue to drive very strong unit growth in 2015 and beyond.

Following industrial applications, wireless applications — driven mainly by mobile phones — will be the next biggest growth market for semiconductors in 2015. However, the 2015 revenue growth forecast for wireless applications, and specifically mobile phones, remains the same as the previous quarter's forecast.

"While mobile phone semiconductor sales will remain robust, driven by the accelerating shift to smartphones and 4G Long Term Evolution, there is concern that weak sell-through for other electronic equipment categories will result in higher inventory levels and drag down semiconductor sales in the first quarter of 2015," said Mr. Erensen.

2014年12月29日星期一

Wonderful Printed Circuit Board



1) Single layer PCB:
   Single-sided printed circuit board is very normal and easy PCB board. The components is a side and the circuit line in the other side, that means there is only one circuit so also named 1layer PCB or single layer printed circuit board. There is having strict limited for single layer PCB design.Because only one layer circuit for the whole design so the Flexible pcb line can not crossover. Besides, the one layer PCB is also very easy to make mistake, such as the solder mask layer, some customers need only one layer solder make, some customers need double layers solder mask.
2) Double layer PCB:
Double layer PCB occupy about 60% of the PCB market.Double-sided printed circuit board as having two layer circuit line so called two layer PCB or two layer circuit board. There are two side circuit lines top and bottom, we also say two copper side. Needing a bridge or a guide line to make the top and bottom circuit connect, we called this via. Via holes in the PCB board which is plated hole. The via hole can connect the top circuit and bottom circuit, this solve the problem of circuit connection and make the double layer PCB twice bigger then single printed circuit board. This is much better then one layer PCB and avoid a lot of problem.
3) Multilayer PCB:
  Multilayer printed circuit board can increase the size of circuit line. The multilayer circuit board make up of one double layer to make inner layer and two single side printed circuit board to make out layers or two double sided circuit board to make inner layer and two one side PCB to make out layers. Through via holes and insulating material to make the circuit connect so that every layer can be a whole system. Besides the layers can not indicate the independent layers, some times also have blank layer which without circuit to control the thickness. The capability we can do is from 4layer up to 28layers.
Sophie Deng
_______________________________________
Wonderful PCB Limited
NO.32A,Building NO.1, XianDaiC hengHuaTing,ChuangYeRoad|NanShan District,ShenZhen City 518054|  China  T +86-755-86229518-806 | F  +86 755 2607 3529|  e  wonderful08@wonderfulpcb.com |
w  www.wonderfulpcb.com  | Skype:wonderful-07   |                                                  
Welcome to our trading shows:
1.Booth: L32,Expo Electronic 2013,Apr.10-12th in CROCUS EXPO,Moscow,Russia
2.Booth: 11J36, HK Global sources  Apr.12-15th, 2013 Asia World-Expo, Hong Kong
3.Booth: 9J35, HK Global sources Oct.12-15th,2013 Asia World-Expo, Hong Kong
4.Booth: 70206, CES  2014  Jan,8th-11th in Las Vegas, USA

2014年12月28日星期日

The characteristic and kinds of PCB surface finishing



As for human living environment asks is ceaseless rise, currently involved in the process of PCB production environment problem is particularly prominent.At present about lead and bromine is one of the hottest;Utilizing and halide will influence the development of PCB board in many ways.Although for now, the change of the PCB surface treatment technology and is not very big, still more distant things like, but should notice: long-term slow change will result in great changes.In the case of environmental protection calls for more and more high, the surface of the PCB process changes will happen in the future.
Surface treatment for the purpose of surface treatment of the most basic purpose is to guarantee good weldability or performance.Due to the nature of copper in air tend to exist in the form of oxide, is unlikely to keep to the original copper for a long time, so you need to other copper processing.While in the later assembly, strong flux can be used to remove most of the copper oxide, but strong flux itself is not easy to remove, so the industry generally don't use strong flux.
Common five kinds of surface treatment technology now has a lot of PCB surface treatment technology, common is hot air leveling(HASL), organic coating, electroless nickel/immersion gold(ENIG), immersion silver and tin the five kinds of craft.Because the PCB production  and material cost and process, so the different pcb design will use the different surface finishing. The cheap electronics  and simple products, we will use HASL or OSP, but for the expensive and high-density electronics products, we will use the immersion gold or silver, the pcb cost will higher, but it will better for components assembly.

Through Hole and SMT


Through Hole Mounting: This mounting technique involves different components which have lead wires that are led to the board through holes, hence the name. In this method, leads rely on holes in a multilayer PCB. The leads are then finally soldered to offer permanent mounting. The technology finds usage in DIP aka Dual Inline Packaging and Pin Grid Array Package. 

Surface Mounting: This is a relatively new mounting method worked out seeing a tremendous increase in the number of pins in Integrated Circuits. As demand for smaller weight and size of packaged weight increased, there was felt a need for a new, improved technology that came to be known as surface mount technology (SMT). In this leads are soldered on PCB surface directly rather than using hole mounting. The technology is used in Flatpack Packages and Chip Carrier Packages.

There are some points that make SMT different from Through Hole, which have been briefly summarized below: 
1.SMT has helped significantly in solving the space problems that were commonly noticed with the Through Hole mounting.
2.The pin count has increased greatly in SMT when compared to its older counterparts.
3.In SMT, the components are leadless and are directly mounted to the board surface. In Through Hole the components have lead wires that are taken to the wiring boards via
holes. 
4.The Pads on the surface in SMT are not used for connection of layers on the printed wiring boards.
5.The components in the Though Hole Technology are larger which leads to lower component density per unit area. The packing density that can be achieved with SMT is very high as this allows mounting component on both sides, when needed.
6.SMT has made possible applications that seemed impossible with through hole.
7.SMT is suitable for high volume production that gives access to lowered cost of unit assemblies which is not possible with through hole technology.
8.With SMT acquiring higher circuit speed is easier due to the reduced size. SMT fulfils one of the prime marketing requirements while assisting in making high performance Rigid-flex pcb in a very small size.
9.SMT has a disadvantage as the capital investment involved in its machinery and production is higher.
10.Designing, production, skill and technology required in implementing SMT is very advanced when compared to through hole technology.

When comparing both, SMT surpasses Through Hole in advantages, which clearly define and justify the majority (90%) use of this technology in board assemblies. Through Hole however is anticipated to remain in use in testing and prototype applications that may need manual adjustments and replacements. Its complete disappearance from the scene seems to be ruled out.